{"product_id":"the-darksaber-3d-model-stl-files-for-3d-printing","title":"The Darksaber 3D model STL files for 3D printing","description":"\u003cp\u003eThis is a 3D model for the Darksaber! By purchasing this you get all 12 .stl files required to 3D print and assemble your very own life-sized light-up Darksaber, as well as an .stl file with the fully assembled 3D model of the Darksaber. This is a digital-only item.\u003c\/p\u003e\n\u003cp\u003eBuilding Instructions:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePrint out all the pieces (some file names will tell you to print more than one of a single part) Note: if you're planning on adding lights, you will need to print all the blade pieces with clear plastic filament. Print the handle with any filament you want. \u003c\/li\u003e\n\u003cli\u003eGlue the blade together with a hot glue gun, but not the blade cover pieces (so you can add lighting)\u003c\/li\u003e\n\u003cli\u003eAssemble your battery pack, button, and led lights\u003c\/li\u003e\n\u003cli\u003eSlide the battery pack inside and glue the button to the button hole\u003c\/li\u003e\n\u003cli\u003eGlue the led light strip to the edges of the saber Tip: if you want the blade to be more stable, you will want to glue a long, thin, light, and sturdy thing to the inside of the blade. A long, thin piece of wood could work. Or, you could glue popsicle sticks (or something similar) to each joint on the inside of the blade.\u003c\/li\u003e\n\u003cli\u003eGlue the blade cover on, and finish gluing the handle together.\u003c\/li\u003e\n\u003cli\u003eCover the sides of the saber with tape and spray paint the blade with gloss black paint\u003c\/li\u003e\n\u003cli\u003eSpray paint the handle gray\u003c\/li\u003e\n\u003cli\u003ePrint the holder if you want to hang it up You're done! Don't swing the saber or it will break :)\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"NonStopNerdShop","offers":[{"title":"Default Title","offer_id":46275148284078,"sku":"DARKSABERSTL","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/1771\/7422\/files\/09ff7390-il_fullxfull.2414926526_a3le.jpg?v=1741317741","url":"https:\/\/jakemakes.us\/products\/the-darksaber-3d-model-stl-files-for-3d-printing","provider":"JakeMakes","version":"1.0","type":"link"}